Designed to form a movement joint where needed in a long run of plastered or rendered masonry where there is a movement joint or to allow for thermal or differential movement in a long run of plaster or render. The bead consists of two plaster stop beads joined with a white extrusion allowing for approximately 4mm of movement when installed vertically. Internal and external use.
| Code | Size | Units |
|---|---|---|
| TL06PMB25 | 2.5m x 6mm | 25 Box |
| TL10PMB25 | 2.5m x 10mm | 25 Box |
| TL15PMB25 | 2.5m x 15mm | 25 Box |
| TL20PMB25 | 2.5m x 20mm | 25 Box |
PVC-u beads are now being used more and more, particularly in areas of high rainfall or extreme damp conditions. They provide an economical alternative to stainless steel products and are used in the same way as normal galvanised or stainless steel beads. They are manufactured from white high density polyvinylchloride high impact window grade material. Other colours are available and manufactured to order. The face of the bead is ribbed and perforated to produce a good plaster or mortar key and can be easily cut to size using a hacksaw.
Benefits
Goods to be stored and transported laying down and in dry conditions. Please dispose or recycle in accordance with waste management regulations.
COSHH & Health & Safety.
Contains no substances hazardous to health. The comparative rough surface finish and sharp edges requires care when handling manually, to avoid risk of cuts and abrasions gloves should be worn.
