TLPAB PVC-u Angle Bead (PAB)

A PVC-u equivalent to traditional plaster and render corner beads. The wing provides a good plaster or mortar key and the bead nose lengthens through the range to allow for increasing depths of plaster or mortar. Fixed with either plaster or mortar dabs or nails these beads can be used internally or externally.

Downloads

Datasheet

Code	Size	Units
TLPAB610	2.5m x 6mm	50 Box
TLPAB812	2.5m x 10mm	40 Box
TLPAB1319	2.5m x 15mm	30 Box

PVC-u beads are now being used more and more, particularly in areas of high rainfall or extreme damp conditions. They provide an economical alternative to stainless steel products and are used in the same way as normal galvanised or stainless steel beads. They are manufactured from white high density polyvinylchloride high impact window grade material. Other colours are available and manufactured to order. The face of the bead is ribbed and perforated to produce a good plaster or mortar key and can be easily cut to size using a hacksaw.

Benefits

- Simple installation (with plaster dabs or appropriate fixings)
- Cost effective
- Easy to cut (by use of tin snips or fine tooth saw)
- Non corrosive
Standard: Meets the equivalent standards required for metal bead to BS EN 13658-2:2005
Material: Exterior grade impact resistant UV stable unplasticized PVC-u

Goods to be stored and transported laying down and in dry conditions. Please dispose or recycle in accordance with waste management regulations.

COSHH & Health & Safety.

Contains no substances hazardous to health. The comparative rough surface finish and sharp edges requires care when handling manually, to avoid risk of cuts and abrasions gloves should be worn.

TLPAB PVC-u Angle Bead (PAB)

Downloads

Request Quote