GAB Standard Galvanised Angle Bead, Mesh Wing

Plaster and render bead. This traditional wet plaster bead provides a strong true corner or arris, with the mesh wings allowing for a good plaster key and resistance to cracking. Fixed by plaster dabs at approximately 600mm centres, push the wings into the dabs to allow for the required plaster depth, up to 13mm, then ensure the nose is set square and plumb as required. Generally for internal use only.

Downloads

Datasheet
DOP

Code	Size	Units
GAB24	2.4m x 43mm wing	50 Box
GAB27	2.7m x 43mm wing	50 Box
GAB30	3.0m x 43mm wing	50 Box
GPAB24	2.4m x 48mm wing	50 Box
GPAB30	3.0m x 48mm wing	50 Box

Beads can be cut to size as required using tin-snips and/or a hacksaw. The large diamond of the expanded metal wings provide a suitable key to prevent cracking. Avoid damage to bead and coating when trowelling.

Standard: BS EN13658-1:2005
Material: Galvanised mild steel DX51D+Z275 (275g/m2 zinc coating)
Material gauge: 0.4mm
Reaction to fire: Class A1

Goods to be stored and transported laying down and in dry conditions. Please dispose or recycle in accordance with waste management regulations.

COSHH & Health & Safety.

Contains no substances hazardous to health. The comparative rough surface finish and sharp edges of expanded metal requires care when handling manually, to avoid risk of cuts and abrasions gloves should be worn.

GAB Standard Galvanised Angle Bead, Mesh Wing

Downloads

Request Quote