Get in Touch

Drylining Beads

The following beads provide the plasterer with the ability to produce true straight edges in drylining applications and give an excellent key for thin coat (skim) plastering. Fixing of all the products is simple and the beads give good resistance to cracking, chipping and impact damage on corners and edges.

Explore our range of Drylining Beads

GPTCB Galvanised Perforated Thin Coat Bead (GPTC)
Drylining Bead.  A thin coat board bead for plaster skimming on plasterboard lined walls. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.
GMMB Galvanised Mini Mesh Bead (GMM)
Drylining bead. A thin coat bead with fine mesh wings designed for one coat plastering. Plaster depth 3mm. Fix with nails or plaster dabs. Use on plasterboard lined walls or aerated blocks. Internal use only.
GCJB30 Aluminium Control Joint Bead
An aluminium bead used to control and relieve stress and movement in drywall, preventing damage by accommodating expansion and contraction of up to 7mm.
GPPTCB Galvanised Premier Perforated Thin Coat Bead Wide Wing (GPTCLW)
Drylining bead. A perforated thin coat bead (as per GPTCB) but with slightly wider wings to give a deeper plaster key. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.
GEB Galvanised Plasterboard Edge Bead
Drylining bead. A bead to reinforce the edges of plasterboard which can be fixed on either with the perforated flange on the face of the board by nailing and skimmed over or with the short flange on the board face for a decorative edge finish. Internal use only.
G3ARSB Galvanised Dry Wall Stop Bead (GPS)
Drylining bead. A bead for protection of thin coat plaster at edges and reveals and for abutment of thin coat plaster against other wall finishes. Also sometimes used as an arch bead. Nail holes for easy fix with drywall nails. Rigid but light bead perforated for an excellent thin coat plaster key. Either 3mm or 6mm Stop. Internal use only.
GTCB135 Galvanised Thin Coat Angle Bead 135º
A galvanised thin coat bead designed to create accurate 135º angles for plaster skimming on plasterboard walls.

Request Quote

Successfully added {{filename}} to your quote list