Drylining Beads

21 September, 2022

These beads provide the plasterer with the ability to produce true straight edges in drylining applications and give an excellent key for thin coat (skim) plastering. Fixing of all the products is simple and the beads give good resistance to cracking, chipping and impact damage on corners and edges.

At Vista we offer 5 drylining beads: GPTC Galvanised Perforated Thin Coat Bead, GMM Galvanised Mini Mesh Bead, GPTCLW Galvanised Perforated Thin Coat Bead Wide Wing, GEB Galvanised Plasterboard Edge Bead and GPS Galvanised Dry Wall Stop Bead.

GPTC GALVANISED PERFORATED THIN COAT BEAD

A thin coat board bead for plaster skimming on plasterboard lined walls. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. For internal use only.

GMM GALVANISED MINI MESH BEAD

A thin coat bead with fine mesh wings designed for one coat plastering. Plaster depth 3mm. Fix with nails or plaster dabs. Use plaster board lined walls or aerated blocks. Internal use only.

GPTCLW GALVANISED PERFORATED THIN COAT BEAD WIDE WING

As GPTC above but with slightly wider wings to give a deeper plaster key. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.

GEB GALVANISED PLASTERBOARD EDGE BEAD

A bead to reinforce the edges of plasterboard.  It can be attached with the short flange on the board face for a decorative edge finish or with the perforated flange on the board face skimmed over. Nail holes for easy fix with drywall nails.  Internal use only.

GPS GALVANISED DRY WALL STOP BEAD

A bead for protection of thin coat plaster at edges and reveals and for abutment of thin coat plaster against other wall finishes. Also sometimes used as an arch bead. Nail holes for easy fix with drywall nails. Rigid but light bead perforated for an excellent thin coat plaster key. Either 3mm or 6mm. Internal use only.

If you are unsure which of our drylining beads you need then please call the office who can discuss your requirements.

For further information about which bead or meash to use for non drylining issues, please read our recent blog post, “Bead and Mesh Guide” or contact the office on 01663 736 700.

Successfully added {{filename}} to your quote list